Fast Ford Parts Fabricated in Florida
LTR Billet Fuel Rails
LTR billet fuel rails for the 2011-2026 Mustang are the largest diameter rails for the Coyote 5.0L Mustang GT. The high flow 11/16" bore is perfect for any supercharger, N/A, turbo or nitrous car. Stainless...
LTR 3/8 EFI Quick Connect Adapter
Compatible with 3/8" Electronic Fuel Injection Fuel Line Installs Between the Fuel Line & Fuel Rail Fits 2011+ Ford Mustang 5.0L (2) 1/8-27 NPT Ports for Fuel Pressure Sensor and/or Nitrous Oxide Feed Internal O-Ring...
Brass Tee "T" for Wastegate Sensor Mounting for Dome Pressure 1/8" NPT
Brass Tee "T" for Wastegate Sensor Mounting for Dome Pressure 1/8" NPT 1/8 to 1/8 Female to 1/8 Male Perfect for Dome pressure sensor, splitting wastegate signal, etc.
LTR Ford Tank Billet Aluminum Mounting Ring
Used for fabricating custom fuel cells in aluminum to accept the factory style fuel pump.
LTR Dual Fuel Pump Wiring Harness
This is the direct replacement wiring harness for our dual return style fuel system. It can also work with other aftermarket dual pump fuel systems. Features: -2 x 10 gauge positive battery cables with fusible...
LTR 2011-2020 Coyote Engine Oil Squirter Block Offs
2011-2020 5.0 piston oil squirter block off / delete plates(qty 4). These billet aluminum plates block off the oil passages when the oil squirters are removed for high up applications (most aftermarket pistons will interfere...
LTR 12V Self Contained On-Board Air System
Features -Includes mount for trunk area -Light Weight- just over 4 lbs. -Can control your air shifter, parachute or anything that needs onboard pneumatics -Self start pressure switch for automatic on and off if pressure...
2011 - 2026 F150 10 Gallon Fuel Cell
-Stock Location -Utilizes stock filler neck -CNC Cut and Formed -Lightweight Aluminum Construction -Utilizes OEM Style Fuel Hat -Drain plug to allow ease of switching fuels -Tank is baffled to prevent fuel slosh -10 gallon...
Coyote Valve Covers (Metal/Aluminum)
Cast Aluminum Coyote Valve Covers We can offer a modification service for these Pick from the options.
Coyote One Piece Cylinder Head Dowels
Coyote One Piece Cylinder Head Dowels -Helps with less deflection and keeps head gasket in place -Internally Threaded for Easy Removal -Fits all year and Coyote Engine Generations
Coyote Secondary Timing Chains HD Pair
Heavy Duty secondary timing chains for Coyote engines. These chains feature increased strength over stock factory chains and have a .020 thicker inner plate, .010 thicker outer plate and .030 thicker chain pin.
Push-to-Connect 1/4" Black Plastic Tubing (per 1 FT Length)
Push-to-Connect 1/4" Black Plastic Tubing Sold Per Foot -Select Quantity for FT length.
Push-To-Connect 1/4" NPT to 1/4" 90° Swivel Tube Fitting
Push-To-Connect 1/4" NPT to 1/4" 90° Swivel Tube Fitting -1/4 NPT Thread -1/4 Push to Connect Tubing
Push-To-Connect 1/8" NPT to 1/4" 90° Swivel Tube Fitting
Push-To-Connect 1/8" NPT to 1/4" 90° Swivel Tube Fitting
LTR Aluminum Dual Seal Connectors (Vanjen Clamps) - Anodized Black
LTR Aluminum Dual Seal Connectors (Vanjen Clamps) LTR Clamping Systems are constructed entirely from 6061 aluminum and provide leak-free Modular connections that are capable of withstanding up to 800psi of boost pressure and temperatures up...
05-14 Mustang Hurst Shifter Mount
2005 - 2014 Mustang Shifter bracket and console block-off plate Mounting bracket takes the guess work out of installing the Hurst Quarter Stick shifter into the S197 chassis, as it uses existing mounting studs in...
90 Degree momentary button
90 Degree momentary button -90 Degree cable exit -Billet Back Housing -Anodized Black -Potted rear wiring to prevent failures -Easy Front Jam nut install (no more fishing wires through the hole) -Main body is .625...
Modular/Coyote TH400/Powerglide Converter lock-up Transmission Spacer
Modular/Coyote TH400 Converter lock-up Spacer This spacer allows you to run a lock up style torque converter in your modular/coyote with a TH400. Features -6061 Billet Aluminum Construction -1 Inch Thick -Bolt in solid dowel...
Proudly Fabricated in the USA
Li Tuning & Racing is located in Clearwater, Florida, and we proudly fabricate all of our performance parts for Ford Mustangs, F150 trucks, and more, all by hand. If you're a hardcore performance enthusiast looking for parts you can trust, that are proudly made in the USA, you've come to the right place!
built by racers
made in america
Li Tuning & Racing
FUEL PUMPS, CELLS & SYSTEMS
2011 - 2026 F150 10 Gallon Fuel Cell
-Stock Location -Utilizes stock filler neck -CNC Cut and Formed -Lightweight Aluminum Construction -Utilizes OEM Style Fuel Hat -Drain plug to allow ease of switching fuels -Tank is baffled to prevent fuel slosh -10 gallon...
LTR Billet Plug & Play Dual / Triple Pump Return Style Fuel System
Li Tuning and Racing 2011-2026 Mustang GT/GT350/GT500 Fuel System Take the guesswork out of building a high horsepower fuel system. This kit comes complete to install to your Mustang and even includes the wiring harness. ...
LTR 2011-2026 Mustang GT Fuel Cell (Factory Location)
-6 Gallon Capacity -Fits in stock location (Driver’s side) -Factory fill tube location -Fits factory style fuel pump assembly -CNC bent/cut
LTR 2011-2026 F150 Fuel System
-Return Style F150 Fuel System -Double Waldron 450 LHP Fuel Pump -Retains OE Fuel Hat -Retains OE Level Sender -No Fuel Tank modifications required -Includes all fittings, wiring relay, fuel lines, fuel pressure regulator and...
LTR 5-Gallon Fuel Cell
-Trunk mounted 5 gallon fuel cell -5052 aluminum -Billet ring to accept stock style fuel hat -Aluminum mounting tabs -Roll over valve -Billet fill cap Please allow 6-8 weeks for fabrication.





